JabberWokker wroteHi,
I have a dreambox 800se hd pvr probably a clone, as cheapish *uk one, and it works perfectly apart from there is no way you can get hd for indovision (I subscribe to hd) and have done lots of research and for sd it's a perfect solution for Bali. I only ever have a problem when I get a power cut and have to reboot a couple times, otherwise it's flawless. I'm still amazed my pvr hd works after all the cuts....
From what I have learned through experience and hearing from other people is that none of the satellite providers are good, I've tried three. *I personally have had multiple yes tv installations that failed on a regular basis whereas with indovision *its been decent. Based on my experience and watching the installation engineers, lol, here they seem to not install to a high level. More of point and hope for the signal etc. all my dishes lnbs have silver foil wrapped around them and i never have seen this living elsewhere. Maybe your problem is not the dreambox but the installation, check your original box with your connections first. With the storms etc the dishes move about. *
If that does not work then your down to the Linux forums for a reflash of your firmware. If your in the deep south then maybe we can meet up and you can see what I have.
Hope this helps.
Hi JabberWokker
I have seen you on another expat forum before, last time I think was about HD, yes I am aware HD does not work since about 7 months, I don't care that much, would be nice to have it but if it doesn't, no big deal.
Now, about the problem, it is not my dish, if it shows all channels then the dish is aligned well, this does not mean it is perfect here.
We moved about 2 months ago and the dish is still not fixed permanently because it's hard to do so without the right tools, but I do have an AGC of about 96 to 99 and a SNR of about 75 like before when it was OK.
I'm pretty sure you understand our problem, the box just can't be authorized by Indovision, if it is the picture is perfect but then Indovision sends the new code and it's gone.
As I said before, it happened more after we moved, and before the Indovision box was always connected to another dish but the card was mostly in the Dreambox.
In the last 1-2 weeks it got problems on the 27th, 1st and 5th of January(27th is 5 days after we paid-have to pay), I am pretty sure Indovision changed their policy, instead of once a month they started to authorize every 5 days from January 1st, this probably changed due to too many people using CardSharing.
Now, the DM should work, it works with your DM, it should work here, but I do have questions, which CCcam do you have and did you put a BoxID in it?
I tried many different images due to another problem I have with it, about this later, but in between now and the 27th I tried two and they both do not work, I had OpenPLI before and during the 27th and the 1st and then after the first I changed to Gemini 5,1, both patched off course and I think both ran CCcam 2.1.3.
I live in Bandung, I bit too far, otherwise it would be nice to have some help from you (t)here, but, I am an electrical engineer and I am really good with computer stuff, have a Mac myself and know the ins and outs of it, I found it a steep learning curve to start with a Dreambox and I still think it is a immensely difficult System to learn.
I got this box here from Kings-Parabola, nice guy and helpful, I do think though this box is not that good, I do have problems with it, the picture freezes on manly one channel, TransTv is the one and sometimes also freezes on other Channels on the same transponder, NEVER on a different transponder.
I think the reason is that the signal does not lock on that transponder, if I switch to another channel and back it won't happen again.
But, aside if this the box seems to do well, software I find so so, not really thought about well, too many pushes of buttons and changing channels if you use the numerical buttons is too slow.
Back to the main problem, so the questions I have, do I need to add a BoxID, do you have the original Indovision box connected(does it work without-concerning authorization) and which CCcam do you use, any config file in there, is so I would like to have it.
Cheers for now Perry